We are engaged in manufacturing and exporting a wide range of push button actuator.

For 22.5mm size actuators, depending on where the wiring is terminated, we offer two types of contact elements (a) rear connected type & (b) front connected type. These come in single contacts, either 1 NO or 1 NC. 

For 30.5mm size actuators, contact elements are of either 1NO or 1NC or 1NO + 1 NC or 2NO or 2NC.

These are push buttons with integral indicating lamps. They are useful where space available on panel is limited. Either LEDs or Lamps are used for the purpose. These are available only in 22.5 diameter cut-out size :

Both shrouded and un-shrouded types of Illuminated Push Buttons are available in our range.

Key Operated Push Buttons

Mushroom Head Push Buttons

A variety of Push Button stations are manufactured in engineering thermoplastic and metallic versions, in their elegant Grey and Yellow colour options. These are designed for maximum human comfort. Push buttons with any combination of NO / NC contacts can be offered. Based on their utility, they are classified into the following: a) Pendant Push Button Stations Grey metallic pendant push button stations can accommodate up to 18 push buttons in two columns and provided with any logical functions as desired by the end user. These are suitable for IP:55 degree of ingress protection. Push buttons are fitted with 6A, 415V AC 1 NO contact elements Yellow and Grey thermoplastic types with maximum 8 push buttons offered. The Yellow ones offer IP:65 degree of ingress protection and fitted with 6A, 415V AC, 1NO contact elements. Mechanical interlocks are provided between operators to ensure sequence/safety. 2) Push Button stations in cast Aluminium enclosure : These are generally used in dust laden industrial environments where a rugged enclosure with IP:55 degree of protection is preferred. Being made of cast aluminium, they are suitable for highly corrosive atmosphere such as in fertilizer and other chemical plants. Cast aluminium or sheet steel canopy is fitted to those meant for outdoor application. Terminal blocks are fitted inside, duly wired from the contact elements. Threaded cable entry provided for Cable Glands. 3) Push Button stations in sheet steel enclosure : These are generally custom-built to suit the customer's requirement. Push buttons with few accessories like Meters etc. can be offered . Terminal blocks are fitted inside, with contact elements duly wired up. Powder coated finish on epoxy base ensures maximum resistance to corrosion. These stations offer IP:55 degree of protection. Made of two major parts (a) actuator and (b) contact elements these push buttons are available in both 22.5 mm and 30.5 mm diameter cut-out sizes. The actuator is made of chrome plated Zinc alloy / Mazak base, with Derlin knobs in standard colours of Red, Green, Yellow, Blue, Grey. Contact elements of different NO / NC combination are assembled on these actuators. Based on shape and function of the knob, these push button actuators are categorized into following types : ( Click following links for details ) Shrouded & Un-shrouded Push Buttons Illuminated Push buttons Mushroom head Push buttons Selector actuator Push buttons Key operated Push buttons Twin actuator Push Buttons Contact Elements of Push Buttons Our push buttons are available in polycarbonate or abs thermoplastic material. We also provide accessories along with the customized boxes like cable glands, conduits, and mounting hinges to meet the customers specific requirements. Twin rectangular push button actuators with a common rectangular bezel is used where space is limited. These are available in 22.5mm cut-out size only. A few varieties as described below are offered: Both buttons flush with bezel, with or without indicator in between Red button protruding out while green is flush, with or without indicator in between Green protruding out while Red is flush, with or without indicator in between.

A variety of Push Button stations are manufactured in engineering thermoplastic and metallic versions, in their elegant Grey and Yellow colour options. These are designed for maximum human comfort. Push buttons with any combination of NO / NC contacts can be offered. Based on their utility, they are classified into the following: a) Pendant Push Button Stations Grey metallic pendant push button stations can accommodate up to 18 push buttons in two columns and provided with any logical functions as desired by the end user. These are suitable for IP:55 degree of ingress protection. Pushbuttons are fitted with 6A, 415V AC 1 NO contact elements Yellow and Grey thermoplastic types with maximum 8 push buttons offered. The Yellow ones offer IP:65 degree of ingress protection and fitted with 6A, 415V AC, 1NO contact elements. Mechanical interlocks are provided between operators to ensure sequence/safety. 2) Push Button stations in cast Aluminium enclosure :These are generally used in dust laden industrial environments where a rugged enclosure with IP:55 degree of protection is preferred. Being made of cast aluminium, they are suitable for highly corrosive atmosphere such as in fertilizer and other chemical plants. Cast aluminium or sheet steel canopy is fitted to those meant for outdoor application. Terminal blocks are fitted inside, duly wired from the contact elements. Threaded cable entry provided for Cable Glands. 3) Push Button stations in sheet steel enclosure :These are generally custom-built to suit the customer's requirement. Push buttons with few accessories like Meters etc. can be offered . Terminal blocks are fitted inside, with contact elements duly wired up. Powder coated finish on epoxy base ensures maximum resistance to corrosion. These stations offer IP:55 degree of protection. Made of two major parts (a) actuator and (b) contact elements these push buttons are available in both 22.5 mm and 30.5 mm diameter cut-out sizes. The actuator is made of chrome plated Zinc alloy / Mazak base, with Derlin knobs in standard colours of Red, Green, Yellow, Blue, Grey. Contact elements of different NO / NC combinations are assembled on these actuators.

We offer best quality of rotary cam switches to our clients. Our rotary cam switches are exactly in accordance with the demand of the market. These switches are manufactured to suit switching angles like 30' 45' 60' 90' depending on the number of positions and ways required.

Compact and elegant cam switches, incorporating latest concepts & technology are produced by us for practically all applications. Switching angles of 30°, 45°, 60° and 90° are achieved in position cell by means of the cam profile. Combination of a fixed end and a metallic moving end determines the start and stop positions of the switching function.

Each contact cell contains one or two contacts, each contact having double make, double break action. The make action is actuated by the contact spring. The break action is actuated by the cam. Contact surfaces are of hard Silver alloy with Nickel electrolyte coating. The standard switch is supplied with a knob, front legend plate indicating switch position & a fixing plate for mounting on a panel.

Twin rectangular push button actuators with a common rectangular bezel is used where space is limited. These are available in 22.5mm cut-out size only.

A few varieties as described below are offered:

Both buttons flush with bezel, with or without indicator in between
Red button protruding out while green is flush, with or without indicator in between
Green protruding out while Red is flush, with or without indicator in between